Air Fryer Beef Jerky

Craving a chewy, savory snack? This homemade beef jerky keeps the soy sauce, Worcestershire sauce and smoky seasonings, but it needs a safety heating step in the oven before drying. An air fryer is suitable only if its manufacturer approves its meat-dehydrating mode and it can maintain 140°F (60°C) with the required airflow. Otherwise, use a food dehydrator.
Making your own jerky lets you choose the seasoning, but it is not a quick air-frying project. Allow about 30 minutes of preparation, 2 hours of refrigerated marinating and approximately 5–6 hours of drying, PLUS the time needed to heat the beef to 160°F internally and an overnight refrigerated dryness recheck. The time estimate does not mean the jerky is ready to eat that same day.
Trim visible fat from lean flank or round steak and slice it across the grain no thicker than 1/4 inch. Marinate in the refrigerator, heat the strips in a 325°F oven until each reaches 160°F internally, then dry at a maintained 140°F. Use the cooled-strip test and overnight recheck below. An air-fryer setting alone does not establish the meat’s internal temperature.
Drying time varies with the appliance, thickness and batch size. The strips must pass the cooled-strip dryness test, then be refrigerated overnight and checked again before serving. Do not shorten drying simply for a softer texture.
So why not ditch store-bought jerky and embark on a flavorful DIY adventure? Your taste buds will thank you.
Questions I often get asked about this recipe:

Can I use a different cut of beef for this recipe?
Use lean whole-muscle beef such as flank, round or sirloin. Trim visible fat and connective tissue and slice evenly across the grain, no thicker than 1/4 inch. Do not substitute ground meat or poultry into this method.
How long can I store homemade air fryer beef jerky?
After the oven heating, complete drying and overnight refrigerated recheck below, store the finished jerky airtight at 40°F (4°C) or below and use within 1 week. Freeze it for longer storage. Keep the finished jerky refrigerated and do not store partially dried meat as jerky.
What can I do if my beef jerky is too tough?
For a more tender bite, slice across the grain and keep the strips evenly thin. Do not shorten drying by an arbitrary number of minutes or leave moist areas in the jerky. The cooled-strip dryness test and overnight recheck still apply.
Can I add different flavors to my jerky?
You can vary the dry seasonings, but keep the same meat preparation, oven-heating and drying steps. Marinating adds flavor; it does not replace heating the meat to 160°F internally. Discard used marinade.
Can I use a dehydrator instead of an air fryer?
Yes. A food dehydrator that maintains 140°F is the default drying equipment for this method. An air fryer is an option only if its manufacturer approves meat dehydration and it can maintain that temperature with the required airflow. Heat the beef in the oven first in either case.
How do I know when the beef jerky is done?
Cool a strip for 5 minutes, then bend it. It should crack without snapping and have no moist or underdone spots. After the strips cool, refrigerate them airtight overnight and check again before serving. If necessary, dry them further.
What you need to make Air Fryer Beef Jerky:

1 pound lean flank steak or round steak, visible fat and connective tissue trimmed, sliced across the grain no thicker than 1/4 inch
1/4 cup Worcestershire sauce
2 tablespoons brown sugar
1 tablespoon liquid smoke
1 teaspoon garlic powder
1/4 teaspoon cayenne pepper (optional)
How to make it:

Prepare the marinade: Use clean hands, utensils and work surfaces. In a bowl, whisk together the soy sauce, Worcestershire sauce, brown sugar, liquid smoke, garlic powder, onion powder, black pepper and optional cayenne.
Marinate the beef: Add the trimmed, evenly sliced beef, coat it well, cover and refrigerate at 40°F (4°C) or below for 2 hours. Longer marinating can make this soy-based mixture very salty. Keep raw beef separate from ready-to-eat foods.
Heat the beef safely: Preheat an oven to 325°F (163°C). Drain the beef and discard the used marinade. Arrange the strips on oven-safe racks over baking sheets. Heat until each strip reaches 160°F (71°C) internally, checking with a suitable thin-tip food thermometer inserted from the side into the center. Oven time varies; the internal temperature, not an appliance setting, is the safety check.
Arrange for drying: Immediately transfer the heated strips to clean drying racks in one layer, with no pieces touching. Use a food dehydrator that maintains 140°F (60°C), or an air fryer whose manufacturer approves its meat-dehydrating mode and that can maintain this temperature and airflow. Follow the appliance instructions; never prop its lid or drawer open.
Dry the jerky: Maintain 140°F throughout drying. Allow approximately 5–6 hours, checking sooner for thin strips; time varies by appliance and batch. Cool a test strip for 5 minutes. It should crack when bent without snapping and have no moist or underdone areas. Continue drying until the strips pass this test; do not stop early just for a softer texture.
Cool, recheck and store: Cool the dried strips, then refrigerate in an airtight container overnight. Recheck for dryness before serving; if needed, dry further at 140°F, cool and repeat the refrigerated recheck. Once completely dried, keep airtight at 40°F (4°C) or below and use within 1 week, or freeze for longer storage.
Tips:

Keep the strips evenly sliced and no thicker than 1/4 inch. Thicker strips need a different drying assessment; do not simply increase thickness in this recipe.
Experiment with different flavors by adding your favorite spices or herbs to the marinade.
You can vary the dry spices, but do not skip the oven heating, cooled-strip test or overnight refrigerated recheck. Follow the appliance manufacturer’s instructions and never prop an air-fryer lid or drawer open.
Latest Reviews:

This air fryer beef jerky is incredible! So much better than store-bought. It’s chewy, flavorful, and addictive. Perfect for hiking or a quick snack. Definitely a keeper. Diane T.
I was skeptical about making jerky in the air fryer but this recipe is a game-changer! Easy to follow and the results were amazing. Crispy on the outside, chewy on the inside. Susan R.
This air fryer beef jerky recipe is a must-try! The marinade is packed with flavor and the jerky comes out perfectly every time. I’ve already made it several times and it’s always a hit. David K.
Printable Recipe:

Air Fryer Beef Jerky
Make this soy-seasoned beef jerky with an oven heating step before dehydration. Use an air fryer only if its manufacturer approves meat dehydration and it can maintain 140°F with the required airflow; otherwise use a food dehydrator. The 8-hour-30-minute estimate includes 2 hours of marinating and up to 6 hours of drying, PLUS variable oven-heating time and an overnight refrigerated dryness recheck before serving.
Ingredients
- 1 pound lean flank steak or round steak, visible fat and connective tissue trimmed, sliced across the grain no thicker than 1/4 inch
- 1/2 cup soy sauce
- 1/4 cup Worcestershire sauce
- 2 tablespoons brown sugar
- 1 tablespoon liquid smoke
- 1 teaspoon garlic powder
- 1 teaspoon onion powder
- 1/2 teaspoon black pepper
- 1/4 teaspoon cayenne pepper (optional)
Instructions
- Prepare the marinade: Use clean hands, utensils and work surfaces. In a bowl, whisk together the soy sauce, Worcestershire sauce, brown sugar, liquid smoke, garlic powder, onion powder, black pepper and optional cayenne.
- Marinate the beef: Add the trimmed, evenly sliced beef, coat it well, cover and refrigerate at 40°F (4°C) or below for 2 hours. Longer marinating can make this soy-based mixture very salty. Keep raw beef separate from ready-to-eat foods.
- Heat the beef safely: Preheat an oven to 325°F (163°C). Drain the beef and discard the used marinade. Arrange the strips on oven-safe racks over baking sheets. Heat until each strip reaches 160°F (71°C) internally, checking with a suitable thin-tip food thermometer inserted from the side into the center. Oven time varies; the internal temperature, not an appliance setting, is the safety check.
- Arrange for drying: Immediately transfer the heated strips to clean drying racks in one layer, with no pieces touching. Use a food dehydrator that maintains 140°F (60°C), or an air fryer whose manufacturer approves its meat-dehydrating mode and that can maintain this temperature and airflow. Follow the appliance instructions; never prop its lid or drawer open.
- Dry the jerky: Maintain 140°F throughout drying. Allow approximately 5–6 hours, checking sooner for thin strips; time varies by appliance and batch. Cool a test strip for 5 minutes. It should crack when bent without snapping and have no moist or underdone areas. Continue drying until the strips pass this test; do not stop early just for a softer texture.
- Cool, recheck and store: Cool the dried strips, then refrigerate in an airtight container overnight. Recheck for dryness before serving; if needed, dry further at 140°F, cool and repeat the refrigerated recheck. Once completely dried, keep airtight at 40°F (4°C) or below and use within 1 week, or freeze for longer storage.
If you enjoyed this recipe, please share it on your social media! I would love for more people to try this delicious and easy-to-make recipe. If you have any questions or feedback, please feel free to leave a comment below. I would love to hear from you! Shhh… Join our secret foodie group on Facebook
Cheesy Tex-Mex Bean Dip
Crab Rangoon Dip
Garlic Parmesan Herb Dip




